Electronics & Product Development — Ohio
Electronics and Product Development
for Ohio Companies.
Kyros Engineering designs electronics, PCBs and embedded firmware for Ohio startups, manufacturers and medical device teams, from a Cleveland bench. A senior engineer leads every project, and the first step is a two-week Build Blueprint at $5,000 fixed.
Kyros Engineering is an electronics and product development firm in Cleveland, Ohio that designs PCBs, embedded firmware and hardware products for Ohio startups, manufacturers and medical device teams, with a senior engineer leading every project. Northeast Ohio clients get same-week bench and on-site support; teams elsewhere in Ohio work with us remotely, with prototypes shipped to our Cleveland bench. Engagements start with a two-week Build Blueprint at $5,000 fixed.
How Kyros Works With Companies Across Ohio
Kyros Engineering is based on Commerce Park Road in Beachwood, on the east side of Cleveland; the postal address reads Cleveland, OH 44122. That location decides how we work in each part of the state. In Northeast Ohio, including Cleveland, Akron, Canton, Youngstown and Mentor, a senior engineer can be at your bench or on your plant floor the same week, and you can drop hardware off at ours. Bring-up, field failures and production-line problems are where that matters most, because the fault is usually found with a probe on the actual unit.
For teams in Columbus, Dayton, Cincinnati and Toledo, the work runs the way it does for our clients outside Ohio: shared repositories, scheduled design reviews, and prototypes shipped to our Cleveland bench for bring-up and debug. Schematic capture, PCB layout, firmware and design-control documentation all travel well. What does not travel is bench time, so we plan it into the schedule instead of discovering it.
Every engagement starts the same way, with the Build Blueprint: two weeks, $5,000 fixed. It ends in a written plan you keep whether or not you hire us for the build: a rough architecture, the parts carrying real risk, the forks where the roadmap can go two different ways, the effort to get through them, and the regulatory and quality standards the design has to meet, listed before design starts. Because it is a fixed price for a defined deliverable, it is easy to budget, including as one line in a grant or accelerator plan. Bounded build work after that, such as one board or one firmware deliverable, commonly runs $8K to $20K and is quoted phase by phase; our published rate is $250 per hour.
We are a small senior team, and that shapes what we take on. Kyros designs and hands off cleanly to U.S. board houses and your contract manufacturer; we do not run a production line, and for design that flows straight into in-house manufacturing an Ohio firm with its own factory is the better fit. For a large program that needs research, industrial design and mechanical engineering staffed in parallel, a full-service studio will carry it better. Our guide to the best electronics and product development firms in Ohio names those firms and says plainly where each one wins.
If you are building your first product in Ohio, the free Ohio Hardware Atlas maps the rest of the ecosystem from public sources: PCB fabrication and assembly shops, prototyping and 3D printing, EMC and safety test labs, funding programs such as JumpStart, Rev1 Ventures, CincyTech and the Ohio Third Frontier, university makerspaces and industry networks. Nobody paid to be listed.
What We Do
Senior-Led Electronics and Firmware, Statewide
Electronics & PCB Design
Architecture, schematic and production-ready PCB layout: power, mixed-signal, sensing and EMC-aware design, released with a BOM your board house can build from.
Embedded Firmware
STM32 and ARM Cortex-M firmware, RTOS and bare-metal, CAN and BLE, bootloaders and updates, verified on the real hardware rather than in a simulator.
Medical & Regulated Devices
Design-control evidence built with the engineering: requirements traceability, ISO 14971 risk inputs and IEC 60601 planning that your quality system can absorb.
A Bench in Northeast Ohio
Bring a board to our Cleveland bench, or we bring the scope to yours. Bring-up and field-failure work goes fastest when the engineer can touch the unit.
Real Project
Automated Eye Diagnostic Kiosk
Prior Engineering Leadership — Self-service diagnostic device — optics, embedded compute, HMI, and cloud in one product
Frequently Asked Questions
- What is the best product development firm in Ohio?
- It depends on what is hardest about your product. Full-service studios such as Kaleidoscope Innovation and Priority Designs suit large programs that need research and industrial design; firms with their own factories, such as ADL Technology and ANZER, suit design that moves straight into…
- Do you work with Ohio companies outside Cleveland?
- Yes. In Northeast Ohio, including Akron, Canton, Youngstown and Mentor, we can be at your bench or plant the same week. For Columbus, Dayton, Cincinnati and Toledo, the work runs remotely with shared repositories, scheduled design reviews and prototypes shipped to our Cleveland bench for bring-up…
- How much does electronic product development cost in Ohio?
- Scope matters far more than the city: how many boards, how complex the firmware, and whether certification or FDA evidence is required. Kyros starts with a two-week Build Blueprint at $5,000 fixed; bounded build work such as one board or one firmware deliverable commonly runs $8K to $20K, quoted…
- Do you manufacture in Ohio?
- No. Kyros designs for manufacture and hands off cleanly: we coordinate PCB fabrication and assembly with U.S. board houses and support your contract manufacturer through first articles and pilot runs.
- Do you develop medical devices for Ohio companies?
- Yes, regulated devices are a core lane. We build design-control evidence alongside the engineering: requirements traceability, ISO 14971 risk inputs, IEC 60601 planning and verification records your quality system can absorb.
- Where can an Ohio hardware startup find board shops, test labs and funding?
- Our free Ohio Hardware Atlas maps them from public sources: PCB fabrication and assembly shops, prototyping and 3D printing, EMC and safety test labs, funding programs such as JumpStart, Rev1 Ventures, CincyTech and the Ohio Third Frontier, university makerspaces and industry networks.
Ready to Talk Through Your Build?
Tell us what you're building. We'll schedule a free consultation to discuss architecture, timeline, and budget — with an engineer, not a salesperson.
Talk to Our Founder